OPCOM V1.99 FOR OPeL для детектора Opel с чипом 45K80

Описание

Weight: 0.2KG

Package: 25cm*15cm*2cm

OPCOM Function:

1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:

Full fault code text description:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
 

You can also run output tests on many controllers：
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

Package list:
1pc x OP COM Interface
1pc x USB Cable
1pc x  Software and Drivers CD

买家需知：

由于光驱兼容性问题，我们无法保证所有的电脑都能正常读取光盘所有数据，如光盘有问题，请联系客服发送下载连接，本店不再另行发实体光盘，如有不便，敬请谅解。

一 、发货和收货须知
1、产品一经拍下，我们会及时安排发货（节假日除外）。
2、您在收到货物时，请务必当着快递员签收，在签收前必须确认箱内的商品无损坏，无缺少，否则请拒收.

二 、保修细节
1、在接到您的返修产品后，我们会将问题产品送到厂商特约维修中心检测与维修；
2、如果检测结果是无故障或者是人为因素造成的故障，我们会及时的通知您，并咨询您的处理意见。

三、符合以下情况可以接受退货和换货
1、在货物签收前，当面在快递送货员面前拆包检查，发现货物有缺失和损坏的。
2、经我们测试，产品确实不能与相关可以检测的车型通讯和开机的情况。非人为损坏。

四 、以下情况下我们有权拒绝的退换货要求
1、退换货物不全或者外观受损的。
2、经我们测试，与客户所提的质量问题不存的情况。
3、客户由于自身原因不会使用设备，而认定产品有质量问题的。
4、有的车型可以检测，有的车型不可以检测，就认定产品质量问题的。
5、产品退回后我们无法再次销售的。

五：换货流程：
需在收到货之内的3个工作日之内联系我们相关退换货问题，我们会尽快为您处理。否则只能作为维修处理