Трансграничный 12V обратный выпрямитель балласт решает автомобильный задний ход камеры

可连接所有汽车后视摄像头/监视器

汽车后视摄像头失真，使后视摄像头中的视频图像更清晰。尤其是在大众汽车。

有些型号的德国车和美国车都是，发动机启动后，输出电压受到干扰，给倒车灯供电的电源不是纯直流电源，而是把一个脉冲信号叠加在上面的示波器上，可以用来测试在这种情况下是否会发现类似的方波信号。摄像机电源线直接接通筒灯，由于工作电压很不稳定导致摄像机工作不正常，视频信号输出也不正常，所以主机可以看到有严重的干扰、抖动，或者不切换画面。

安装方法：

 输出正负电源连接摄像头，倒车灯电源输入接口为负极，倒车镇流器是解决倒车摄像头干扰纹波的选择。

 有效解决倒车情况或倒车黑水涟漪，接线简单，德系车和老款车的。

 包装包括：1 x功率继电器电容滤波整流器

Specification:

Can connet with all the car rear view camera/ monitors

Prevent distortion from your car rear view camera going away, and make the video picture in the rear view camera more clearly. Especially in the for volkswagen.

Some models of German cars and American cars are, after engine start, output voltage interferences, power supply to the reversing lights are not pure DC power supply, but a pulse signal is superimposed on top oscilloscope can be used to test if the conditions will It found a similar square wave signal. Camera power supply line directly on the down lights, because the working voltage is very unstable cause the camera does not work properly, the video signal output is also not normal, so the host can see there is a severe interference, jitter, or not to switch reversing the screen.

Installation method:

Output positive and negative power supply connected to the camera, reversing lights power input connector is negative, reversing ballast is the solution to your reversing camera interference ripple best choice.

Effective solution to reversing the situation or reversing black water ripples, wiring simple, German cars and model year old car essential artifact.

Package included: 1 x Power Relay Capacitor Filter Rectifier